Efficient Networks Router family Command line interface Specifiche Pagina 59

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 379
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 58
Chapter 3. Configuring Router Software 59
Verify the Router ConÞguration
Test IP Routing
Test IP Routing over the Local Ethernet LAN (from PC)
¥ Use the TCP/IP ping command or a similar method to contact the configured target router specifying the
Ethernet LAN IP address.
¥ If you cannot contact the router, verify that the Ethernet IP address and subnet mask are correct and check the
cable connections.
¥ Make sure that you have saved and rebooted after setting the IP address.
¥ Check Network TCP/IP properties under Windows 95. If you are running Windows 3.1, check that you have
a TCP/IP driver installed.
Test IP Routing to a Remote Destination
¥ Using the TCP/IP ping command, contact a remote router from a local LAN-connected PC. When you enter
the ping command, the router will connect to the remote router using the DSL line.
¥ If remote or local WAN IP Addresses are required, verify that they are valid.
¥ Use the iproutes command to check, first, the contents of the IP routing table and, second, that you have
specified a default route as well.
Test Routing from a Remote Destination
¥ Have a remote router contact the target router using a similar method.
Test TCP/IP Routes
¥ Contact a station, subnetwork, or host located on the network beyond a remote router to verify the TCP/IP
route addresses entered in the remote router database.
¥ Verify that you configured the correct static IP routes.
¥ Use the iproutes command to check the contents of the IP routing table.
Test Bridging to a Remote Destination
Use any application from a local LAN-attached station that accesses a server or disk using a protocol that is being
bridged on the remote network beyond the remote router. If you cannot access the server:
¥ Verify that you have specified a default destination remote router.
¥ Make sure that you have enabled bridging to the remote router.
¥ Check that bridge filtering does not restrict access from the local station.
Vedere la pagina 58
1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 378 379

Commenti su questo manuale

Nessun commento